CA ALP License Update for Linux
Installation Instructions

Revision history

1. Install may be done in either of 2 ways
   
   
   1. Via the install script wrapper provided.
      If invoking via the install script, run: install <absolute installpath>
      
      where: <absolute installpath> is an optional argument.
      
      If $CASHCOMP is defined in the user environment, the installpath will be ignored. If $CASHCOMP is not defined and installpath is not provided then /opt/CA/SharedComponents will be assumed as the default value of installpath.
      
      In this case, the rpm file must be in the same directory as the install script.
      
      
   2. Directly from the command line
      
      First, the value of CASHCOMP must be obtained. This must be done by sourcing either /etc/profile.CA or /etc/csh_login.CA.
      
      The following usage is required if $CASHCOMP is defined:
      
      rpm -U --replacefiles --replacepkgs --prefix $CASHCOMP ca-lic-01.0062-0007.<arch>.rpm
      
      The following usage is required if $CASHCOMP is not defined and a non-default install location is desired:
      
      rpm -U --replacefiles --replacepkgs --prefix <path> ca-lic-01.0062-0007.<arch>.rpm
      
      The following usage is required if $CASHCOMP is not defined and the default install location /opt/CA/SharedComponents is desired:
      
      rpm -U --replacefiles --replacepkgs ca-lic-01.0062-0007.<arch>.rpm
      
      where: <path> is any directory other than the root directory. <arch> is the hardware architecture of the target machine (i386, ia64, or s390).
      
      
2. The following pre-requisites are noted:
   Linux Intel:
   Architecture: Linux for Intel or Itanium 64-bit
   Devices: Any TCP/IP supported network connection
   Prerequisites: glibc 2.x
   Linux kernel: 2.4.x
   
   Linux for s390:
   Architecture: Linux for S/390 and zSeries in 31 bit mode
   Devices: Any TCP/IP supported network connection
   Prerequisites: glibc 2.x
   Linux kernel: 2.4.x