SupportConnect - CA IDMS Technical Document Index
  

CA IDMS
Technical Document Index

Doc ID# General Technical Support Documentation Last Revision
TEC462676 How can Visual DBA be implemented across multiple IDMS CVs and LPARs? 05/06/08
TEC462354 How to verify which IDMS products are installed? Not sure how to interpret the FMID values. 04/29/08
TEC462352 Managing IDMS SQL Access Modules. 04/29/08
TEC462347 Where can I locate the SQL State error messages for the CA Visual DBA product? For example SQL State=IM002. 04/29/08
TEC462346 RELOAD gets unexpected tape management errors when using the REUSE WORKFILES option, such as CAT9040I and CAT9041I in in CA-TLMS 04/29/08
TEC462345 When EXPORTing the contents of the result browser to a file, national characters are incorrectly translated. 04/29/08
TEC461703 Improper BIND Record techniques can cause storage overlays when Extending an IDMS Rununit 04/18/08
TEC461702 What would create the QUEUE "DEBUGQUEUE"? How can I determine what user created this data in this queue? 04/18/08
TEC461701 Does restructure need to be run if changing 'occurs depending on' maximum occurrences? 04/18/08
TEC461700 D003 PROGRAM CHECK IN ADSCDCOM after upgrade to CA IDMS 16.0 04/18/08
TEC461698 What is the support status of STANDALONE (non-IDMS) CA CULPRIT 10.21? 04/18/08
TEC461696 Selecting 'Choose Tables' in OLQ MENU MODE results in a catalog request error. 04/18/08
TEC461695 After upgrading to R16.0, Performance Monitor Report PMARPT00 receives the error message PMA00901. What is the cause of this error and how is it resolved? 04/18/08
TEC461694 Error Status 0068 in CICS program 04/18/08
TEC449462 Accessing nonSQL data using SQL DML 04/01/08
TEC449461 Can IDMS options be customized with SMP/e after installation? 04/01/08
TEC449459 Accessing IDMS from the .NET Platform 04/01/08
TEC449457 How to write to flat files from IDMS. 04/01/08
TEC449355 RELOAD of an SQL-defined database gives U0016 and several miscellaneous messages from the SORT utility. 03/31/08
TEC449354 RELOAD of an SQL-defined database gives UT000021 03/31/08
TEC449353 RELOAD of an SQL-defined database abends with a UT010004 and an 0708 error-status. 03/31/08
TEC449352 IDMS Timeout and Limits 03/31/08
TEC449350 Migrate SQL Access Modules. 03/31/08
TEC449327 On a DCMT DISPLAY LOADLIB where does it get the DDNAMES that are displayed? 03/28/08
TEC448043 When trying to modify & generate a new DMCL we receive the following message: DB001042 T929 C-4M6001: TABLE:LOADTEXT-157, AREA:DDLCATLOD SPACE EXHAUSTED. Can CATSYS.DDLCATLOD page range be expanded using the UNLOAD and RELOAD utilities? 03/06/08
TEC447355 Writing SMF Records from CA IDMS systems 03/06/08
TEC447289 Cannot delete an ADS/Online dialog. 03/04/08
TEC447288 How to navigate a dictionary to get a list of sets for which a record type is an owner and a member. 03/04/08
TEC447286 Sizing information for CF (Coupling Facility) level upgrades. 03/04/08
TEC447285 Downward compatibility of release 16.0 ADS dialogs. 03/04/08
TEC447041 How to expand the page range of the CATSYS.DDLCATLOD using the UNLOAD and RELOAD utility 02/28/08
TEC447038 How can I code a program to get a list of all records in IDD? 02/28/08
TEC447037 RHDCMAP1 translates map literals to upper case 02/28/08
TEC446805 Downloading hyper CA IDMS APARs from CA Support Online for a specific genlevel. 02/25/08
TEC446639 Checklist for TCP/IP Listener Implementation using IDMS Server JDBC Type 4 Driver 02/21/08
TEC443154 LE DC COBOL program abends with UFF3 reason code 0007. How do I find the offending program? 02/08/08
TEC445830 As DBA I may have the need to use OLQ to browse the records in the QUEUE area DDLDCRUN. CA does not deliver a subschema that can be used for this purpose. 02/08/08
TEC445825 As DBA I may have the need to see exactly what load modules reside in the System Catalog Load area CATSYS.DDLCATLOD. CA does not deliver a subschema that can be used in OLQ for this purpose. 02/08/08
TEC445823 How to prevent unexpected errors at runtime (i.e. 1491, 1492, 1493, 1494 or 1495) 02/08/08
TEC445821 What are the pros and cons of using RETRIEVAL NOLOCK? 02/08/08
TEC445575 Cobol program precompiler, IDMSDMLC, seems to be converting all code to uppercase. This program contains JAVA imbedded code that is case sensitive. 02/06/08
TEC445568 PDAT Storage in XA 31 Bit 02/06/08
TEC445567 What can cause DC015007 SOS CONDITION errors 02/06/08
TEC445561 RHDCMPUT does not check IDD entity occurrence security when generating map load modules 02/06/08
TEC445558 Allocating AJNLJOB, PLOGJOB and JESRDR for log and journal offloads. 02/06/08
TEC445544 How to Download IDMS Documentation. 02/06/08
TEC444306 Quick References for fast review of command syntax 01/16/08
TEC444213 Message $HASP100 in TWSZ CONTROLLER or TRACKER JOBLOG on z/OS 1.7 or higher. 01/16/08
TEC444212 What does IDD error message DC601128 mean? 01/16/08
TEC443997 An online COBOL program abends with code UFF3 01/14/08
TEC443153 Is there a way to change the priority for Specific Batch and CICS Jobs? Can you have specific priorities for CICS Jobs Verses Batch Jobs? 12/28/07
TEC443138 We run a log archive, but a DCMT DIS LOG afterwards still sho ws the log as the same % full. Why? 12/28/07
TEC443135 A CICS 1473 error can occur even though statistics indicate that Max ERE has not been reached. 12/28/07
TEC443134 I am wondering if we can suppress the DC050001 messages for the DCLOG % full. These messages seem to appear very often. How does the system determine when to issue them? 12/28/07
TEC443016 Receiving a condition code 12 (cc=12) in the IDMS install job JOB02, CAIIPDS program. What does this mean? 12/27/07
TEC443008 IDMS CV startup abends with DC200006 Area Already in use--Not Available 12/27/07
TEC443007 IDMS Startup abends with U3024 12/27/07
TEC442394 Can IDMS internal security groups be included in other groups? 12/17/07
TEC442304 Batch to CV jobs receiving error status 0326 and 0361 but a rerun works fine. 12/14/07
TEC442303 RELOAD utility fails with error message UT000021 12/14/07
TEC442302 How do I download the latest IDMS Base tape from Support Connect and upload it to the Mainframe? 12/14/07
TEC442301 How to modify a record that is not IDD-OWNED? 12/14/07
TEC442054 When a DCMT VARY DMCL command is issued, are the buffers flushed when it's determined that a change has been made? 12/11/07
TEC442053 In comparing a Print Space report with the IDMSDBAN report, there is a consistent difference of 8 bytes in record length, for all record types. The longer length is on the Print Space report. 12/11/07
TEC442052 When a DCMT VARY DMCL is issued, how does IDMS determine that an area/segment has changed? What does it determine is a significant change? 12/11/07
TEC442051 When a DCMT VARY DMCL is issued, what circumstances cause control blocks to be put into the 'dead' control blocks? 12/11/07
TEC442049 Log messages sometimes contain a transaction ID instead of a program name, even when other messages for the same task use the program name. One example is a CICS deadlock (DC001000). Is that the correct format, or should the program name appear instead? 12/11/07
TEC442048 Occasionally I will see an error message with a hex return code; one example is RC=0BCA on the message DC329000 TMGR error 00: DBIO error RC=0BCA. I can't find any documentation on these hex abend codes. What do they mean and where are they documented? 12/11/07
TEC442047 We are seeing a Deadlock message that contains a page number instead of a line index, so the reference is to a page instead of to a specific record. Is this an error, or a data page deadlock of some sort? 12/11/07
TEC442045 Many user products use the DPLX and IOX2 exits and hook into user portions of the DMCL-related control blocks. If a DCMT VARY DMCL is issued, how can user products determine that they need to 'reload' these addresses? 12/11/07
TEC441725 Several tasks abended with Stall abend DC001003 for a DBKEY. 12/06/07
TEC441724 A user is defined in IDD with "AUTHORITY FOR DISPLAY IS (ALL)". This user ran IDMSBCF to create a DMCL. Why was an update allowed when the user only has display authority in that dictionary? This was a production environment that needs to be protected. 12/06/07
TEC441723 We Unloaded and Reloaded an area to expand the page range. We quickly discovered that the records in the area were defined as WITHIN AREA...OFFSET 0 for 8400 Pages, so the Unload/Reload did nothing. Can we just remove the offset clause? 12/06/07
TEC441722 Is there a way that I can obtain a report on TASKs from the system dictionary, for a given system, that are defined with LOC=BELOW? 12/06/07
TEC441720 My report contains dupicate rows, how can I structure my query to avoid this? 12/06/07
TEC441719 I am trying to apply an APAR and am getting the following message: AMA120I IDR DATA FULL. What does this mean? 12/06/07
TEC440765 I have received several DC015007 indicating an SOS condition for pool 255. 11/21/07
TEC440763 After upgrading CV we get system abend SFF1 at startup. 11/21/07
TEC440603 What is SMP/E FMID CGJG004? 11/21/07
TEC440606 Can I use IBM's WLM to manage IDMS online transactions? 11/20/07
TEC440605 What is the recommended value for THREADSTACK in CEEUOPT? 11/20/07
TEC440587 We recently upgraded to V16 SP4 from V15 SP5. We have a batch application that readies an area in the main program, then calls a sub-program which also readies the same area. This caused an area locked error status 0966. 11/20/07
TEC440586 Are Resource limits ever reset by anything during a task execution? 11/20/07
TEC440585 Since we turned the multitasking feature on, at peak times, we are experiencing excessive CPU utilization and it's impacting the lower priority batch environment and TSO 11/20/07
TEC440584 Apparently identical source of a cobol program in two different PDS libs cause very different results in IDMSDMLC. One gets many many errors. One compiles cleanly. 11/20/07
TEC440583 What makes up the 32 byte fixed portion of an SR8? What do the 32 bytes consist of? 11/20/07
TEC440475 After upgrading to a LE/COBOL environment some runtime modules, notably CEEPLPKA, are loaded into the IDMS 24-bit Reentrant pool. Why would this COBOL environment be loaded below the line? Are there additional defs required to force it above the line? 11/19/07
TEC440474 When concatenating multiple files created by EXTRACT JOURNAL for a ROLLFORWARD operation should the "COMPLTED" or "ALL" parameter be used? 11/19/07
TEC438558 How to calculate the page number and line index for negative DBKEYs? 11/15/07
TEC438550 I can't get my DB/REORG job to run. I get messages such as DBST0001E, DBST002E with program USRPAR and status 1401, but I also get other messages. 11/15/07
TEC438549 I have a very complex SQL query which uses an excessive amount of CPU when being compiled. It runs fine but how can I get around the compile problem? 11/15/07
TEC438545 We have just upgraded to VSE 4.1 and are getting problems in CA-IDMS, particular with batch utilities and local mode programs? 11/15/07
TEC435975 How to install or upgrade IDMS and it's related products? 10/15/07
TEC435915 How can we automate the startup of the CA IDMS Java Server running under Unix Systems Services (USS) on z/OS? 10/12/07
TEC433613 How does z/OS 1.9 affect CA IDMS sites? 09/18/07
TEC433739 3931 error status doing ENQUEUE or DEQUEUE in DC COBOL 09/17/07
TEC432290 Cobol statement WRITE LOG MESSAGE ID 999999 causes a 3996 CV abend after Sp4. Prior to that, it didn't. Why? What can be done? 08/27/07
TEC432289 I am trying to run an unload/reload with the SORT work files directed to tape, but I always get DB002765. Is this possible and if so how? 08/27/07
TEC432108 How can I check if IDMSJNL2 exit has been called before or after the writing of a primary journal block? 08/23/07
TEC432107 DDLDCRUN AREA runs out of space because of to a high default queue retention period and you want to change the default. 08/23/07
TEC430818 The high "orphan counts" which are the result of SR8 splits in rapidly growing system-owned linked indexes cause increasing performance degradation during erase, disconnect, and purge. What techniques can be used to minimize this problem? 08/03/07
TEC430731 How should I Configure my "Timeout" Parameters when using the CA IDMS Database Server Option Product 08/02/07
TEC430540 Missing SYSMOD HE00SP4 applying SP05 maintenance. 08/01/07
TEC430274 Deadlock Details Activation 07/27/07
TEC430163 Error message in IDMS log "Query/Reply: invalid input buffer" 07/26/07
TEC428806 No new Release Guide or manuals for IDMS 16.0 SP05 07/13/07
TEC427946 Running IDMSBCF or OCF results in a deadlock 06/28/07
TEC427508 Does CA IDMS require the designation of the CA Common Services CAILIB in the CDMSLIB concatenation? 06/22/07
TEC427396 How to determine the instruction in a dialog being executed at the time it abended or was cancelled as the result of program checks in ADSORUN1 or ADSOMAIN 06/22/07
TEC427060 How to get started on the first execution of the new REORG utility to expand a database area 06/17/07
TEC426832 In the process of an IDMS upgrade, I need to specify a TRANSID in IDMSINTC. If I have multiple CICS regions, do I need different IDMSINTC's with unique TRANSIDs? 06/14/07
TEC426795 What causes a GLTE abend? 06/14/07
TEC426793 What can cause a NOSPACE error during ROLLFORWARD or ROLLBACK? 06/14/07
TEC426791 I am using OCA-MQ from DataDirect and upgrading to CA-IDMS 16.0. Several tasks now gets a PROGRAM CHECKED NEAR RHDCMPRF AT OFFSET 9B4. Any hints? 06/14/07
TEC426394 Using JREPORT with a date/time span (DTESTAMP), how can I obtain the date/times I want? 06/08/07
TEC426285 Why can't I use the SYSGEN PROGRAM parameter NONCONCURRENT to single thread a COBOL II or COBOL LE program? 06/07/07
TEC426274 I have activated HPSPO (High Performance Storage Protection Option) and some programs are now abending with DC027001 V35 T4112 D003 PROGRAM CHECK IN progname 06/07/07
TEC425171 What is the point of being able to use the FOR UPDATE/READ ONLY clause in a SELECT statement in OCF, when it is only relevant to programmed SQL (Cobol, ADS, JDBC, etc)? 05/22/07
TEC425170 Using SQL LOAD, why do validate errors report an ERROR DBKEY which is not in the ERROR AREA reported? 05/22/07
TEC425169 I am running the CLEANUP utility and getting a UT011000 "Unable to remove LDel" message. Why does this happen? 05/22/07
TEC425168 How (or when) do I issue the ALTER INDEX statement if I want to change the INDEX BLOCK CONTAINS clause of an index as part of an unload/reload of an SQL-defined database? 05/22/07
TEC423033 SOX COMPLIANCE: Is there a way to produce an audit trail with a complete history of user activities that shows what was updated, who did it and when? 04/23/07
TEC420365 Is there a way to capture only the first IDMS SYSTEM SNAP generated and disable subsequent system snaps automatically? 03/21/07
TEC420364 Why is the following error message issued in CICS after upgrading to IDMS 16.0: IDMSOCIC WRITEQ TD FAILED EIBRESP=00044 QUEUE=DBUG LENGTH=00132 03/21/07
TEC324000 Web-enabling Advantage CA-IDMS/DB with Java Server Pages 02/12/07
TEC415203 Microsoft Windows Vista has tightened security. How does this impact data source configuration? 01/16/07
TEC415202 I understand that Microsoft Windows Vista is not shipped with WinHelp. Will the help facilities still work with CA-IDMS products? 01/16/07
TEC415198 CA-Visual Express is included with CA-IDMS Server. Will this product work with Microsoft Windows Vista? 01/16/07
TEC415197 We are upgrading our PCs to Microsoft Windows Vista. Will we need a new version of CA-IDMS Server, CA-IDMS Visual DBA, or CA-IDMS QuickBridge? 01/16/07
TEC415196 We require our users to sign on to use IDD, OLQ, and so on. Once these APARs are applied, will we have to require mixed case passwords to use these applications? 01/16/07
TEC415195 What does this mean for sites that use CA-IDMS internal security? 01/16/07
TEC415194 Our site is not ready to require the use of mixed-case passwords. Will the application of these APARs or the installation of a CA-IDMS Service Pack that contains these APARs require the use of mixed-case passwords? 01/16/07
TEC415193 Starting with z/OS 1.7, installations have the option to use mixed-case passwords. Does CA-IDMS support mixed-case passwords? 01/16/07
TEC413185 Can I compile an ADS dialog in batch with ADSOBCOM "from load" if the loadlib is a PDSE? 12/14/06
TEC413180 How do I enable datasharing for some, but not all, files and areas in the same segment? 12/13/06
TEC413176 IDMS is abending with a 3962 at startup, Messages DC202027/8/9 are issued. What does this mean? 12/13/06
TEC411975 How can I see if the High Performance Storage Protection Option is enabled? 11/27/06
TEC411189 Is it possible to access my CA-IDMS legacy data via the web? 11/14/06
TEC385898 Using JREPORTs, how can one produce a report containing only the BFOR and AFTR records corresponding to updates done by a specific User-ID? None of the journal records appear to contain USER-ID. 07/07/06
TEC391619 IDMS internal security has been implemented with resources grouped within a category and to provide access via a single grant. Is there a query that will report on all of the categorized resources and the group name assigned to the resource category? 03/14/06
TEC391607 After upgrading to r16 I receive a K006 ABEND when IDMSINTC starts up. Why do I receive this ABEND? 03/14/06
TEC391606 When pf17 is depressed in DME the following CICS message is received: "DFHAC2001 TRANSACTION is not recognized". What is the cause of this error and how can it be corrected? 03/14/06
TEC391599 Is there a way to join the contents of a non-CA-IDMS file and a CA-IDMS database record, in a report or query? 03/14/06
TEC354631 Data Stored in SQL Tables 01/05/06
TEC344670 Why are Advantage CA-IDMS Database Server Option and Advantage CA-IDMS Database SQL Option install options with Advantage CA-IDMS Visual DBA r2 SP1 if I am not licensed for them? 12/20/05
TEC382575 How do I configure IBM's WebSphere Application Server to work with Advantage CA-IDMS Server? 11/10/05
TEC377576 CA-IDMS Visual DBA Features Summary 09/09/05
TEC371486 How many CHKUSER tasks should I define on the SYSTEM statement in the CA-IDMS Sysgen? 07/02/05
TEC371485 Using JREPORTs, how can one produce a report containing only the BFOR and AFTR records belonging to a specific PROGRAM-NAME? 07/02/05
TEC339998 STACKSIZE and ABEND Storage in the Advantage CA-IDMS CV 03/14/05
TEC330752 How Do You Restrict the Ability to READY Certain AREAs for UPDATE Access Without Turning on Security for the DB Resource Type? 03/14/05
TEC324001 What do I do if the dialog that I am debugging with Advantage CA-ADS Alive Option is not animating? 03/14/05
TEC346871 Researching IDMS-CV Abends with S80A/S878 11/01/04
TEC346861 Common Causes of ASRA Abends in UCFCICS 11/01/04
TEC344684 You have a database where the bulk of records are stored VIA indexes, you experience a large number of deadlocks when added, if you convert to a location mode of CALC, would you eliminate or reduce the number of deadlock occurrences? 10/07/04
TEC323983 Using JDBC Connection Pooling with Advantage CA-IDMS Database Server Option 05/03/04
TEC321241 Give Advantage CA-IDMS/DB Database Storage Management a facelift while improving productivity 04/01/04
 
 
 
Page Tools
printPrint